Factors Affecting The Quality Of Metal Cutting By Laser Cutting Machine
We all know that laser cutting machines can be used to cut metal, but you still need to pay attention to the cutting quality when cutting metal. So what are the factors that affect the quality of metal cutting by laser cutting machines? The following editor will introduce to you.
1. The output power and mode of the laser
The higher the output power of the laser, the better the cutting quality on the same thickness of the plate. The higher the fit between the laser cutting mode and the material, the better the cutting quality.
2. The thickness of the metal material
The metal laser cutting machine is suitable for cutting thin plates. The cutting effect of carbon steel below 12mm and stainless steel below 6mm is obvious, the quality is the best, and the efficiency can be guaranteed. For example, when the material thickness is 1mm, the material cut is extremely smooth.
3. The smoothness of the metal surface
Generally speaking, the smoother the surface of the material, the better the quality of the cut. Han's Yueming Laser is independently researched and developed, and its metal laser cutting machine has an automatic induction system that can automatically adjust the height of the cutting head according to the different thickness of the material.
4. Focus position when cutting
The simple truth is that when the focus of the metal laser cutting machine is set, the precision and accuracy of the cutting can meet the requirements.
5. Cutting speed
No matter what kind of material the laser cuts, if the cutting speed and material consistency can be achieved the best, then the cutting effect at this time is the best, too fast and too slow will affect the processing effect of the metal laser cutting machine.
6. Auxiliary gas pressure and type
The higher the pressure, the higher the purity of the gas, the less the dross adhered to the material, and the smoother the cut. Different gas types have different cutting speeds and effects. Generally speaking, the cutting speed of oxygen is the fastest, the cutting effect of nitrogen is the best, and the cutting cost of air is the lowest.
Through the above introduction, we understand that there are mainly the above factors that affect the quality of metal cutting by laser cutting machines. Pay more attention to the above factors in future operations.
